Livestock Fence - Hexagonal Mesh

Animal hexagonal mesh fence is a protective facility commonly used in animal breeding or enclosure places, named after its hexagonal mesh. Here is a detailed introduction about it:

characteristic

Structural stability: The hexagonal structure of the hexagonal mesh gives it high stability and strength. This structure can evenly disperse external forces, and is not easily deformed or damaged when subjected to external forces such as animal compression, collision, or wind blowing. It can maintain good protective performance for a long time.

Good anti escape effect: The hexagonal mesh size is uniform and relatively small, which can effectively prevent animals from drilling out or squeezing out of the mesh, especially for small animals such as rabbits, chickens, ducks, etc., providing reliable anti escape protection.

Corrosion resistance: Usually treated with anti-corrosion techniques such as hot-dip galvanizing or plastic coating, it has strong corrosion resistance and can resist the erosion of outdoor factors such as rainwater, moisture, and ultraviolet rays, extending the service life of guardrails and reducing maintenance costs.

Good flexibility: Hexagonal mesh has a certain degree of flexibility and can adapt to changes in terrain, whether it is flat ground or sloping mountains, it can be easily installed, fitting the undulations of the ground and forming a good protective barrier.

Specification parameters

Wire diameter: The wire diameter is generally between 1.5-4.0mm. The selection of silk diameter varies for different animal species. For small animals such as ornamental birds, a wire diameter of 1.5-2.0mm can be selected; For medium-sized animals such as sheep and dogs, the wire diameter is usually 2.0-3.0mm; for large animals such as cows and horses, a wire diameter of 3.0-4.0mm is required to ensure the strength of the guardrail.

Mesh size: The side length of the mesh is usually between 25-100mm. Small animals are suitable for smaller mesh holes, such as 25-50mm mesh holes; Medium sized animals can use 50-75mm mesh holes; Large animals generally use a mesh size of 75-100mm, but if the animal is more lively and active, the mesh size can be appropriately reduced.

Height: The height of the guardrail depends on the type and activity ability of the animals. The height of guardrails used for captive poultry is generally between 0.8-1.2m; for livestock such as sheep and pigs, the height of guardrails is usually between 1.2-1.5m; for large animals such as cattle and horses, the height of guardrails is generally between 1.5-2.0m; for captive animals with strong jumping ability, such as deer, the height of guardrails may need to reach 2.0-3.0m.

Length: The length of hexagonal mesh can be customized according to actual needs, commonly including 20m, 30m, 50m, etc. In actual installation, a suitable length of hexagonal mesh can be selected for splicing according to the circumference of the breeding site or the size of the area that needs to be divided.

Installation and maintenance

Installation: Before installation, clean the installation site to ensure that the ground is flat. According to the size and shape of the site, determine the position of the columns and install them. The spacing between the columns is generally 2-3m. Unfold the hexagonal mesh, start from one end, and fix the mesh to the columns. Special metal clips or steel wires can be used to tie the mesh firmly to the columns. During the installation process, attention should be paid to the tension of the mesh to avoid any looseness or over tension. For areas with complex terrain, such as bends or slopes, it is necessary to cut and adjust the mesh appropriately to ensure the sealing and stability of the guardrail.

Maintenance: Regularly inspect the condition of the guardrail, check whether the mesh is damaged, rusted, deformed, and whether the columns are loose, tilted, or corroded. If any damage is found on the mesh, it should be repaired or replaced with mesh of the same specification in a timely manner; For rusted areas, rust removal treatment should be carried out and anti-corrosion coating should be reapplied; If the column becomes loose or tilted, it should be reinforced or corrected in a timely manner; For columns with severe corrosion, they need to be replaced in a timely manner. At the same time, it is necessary to maintain the cleanliness of the surrounding environment of the guardrail and avoid damage to the guardrail caused by the accumulation of debris.