 |
| Quantity: | |
|---|---|
hexagonal expanded metal mesh
Expanded metal mesh is also called pulledd plate wire mesh. A rigid piece of metal that has been slit and drawn into an open mesh pattern in a single operation. It is stronger, lighter in weight and more rigid than the original base metal.
Material: Low Carbon Steel Plate, Aluminum Plate, Stainless Steel Plate, Titanium Plate, Alum-Platinum Plate, Lead Plate, Nickel Plate, etc.
Main Processes: Punching and Pulling.
Finishing: Electric-galvanized, hot-dipped galvanized, spray-printed
specification:
mesh thickness(mm) | distance | distance | Strand(mm) | width |
T | SWD | LWD | S | W |
0.3-0.6 | 3 | 3 | 0.3-2.0 | 0.5-1.25 |
0.3-0.6 | 3 | 4 | 0.3-2.0 | 0.5-1.25 |
0.3-0.8 | 4 | 4 | 0.3-2.0 | 0.5-1.25 |
0.3-0.8 | 4 | 5 | 0.3-2.0 | 0.5-1.25 |
0.3-0.8 | 5 | 5 | 0.3-2.0 | 0.5-1.25 |
0.3-1.0 | 5 | 6 | 0.3-2.0 | 0.5-1.25 |
0.3-1.5 | 6 | 7 | 0.3-2.0 | 0.5-1.25 |
0.3-1.5 | 6 | 12 | 0.3-2.0 | 0.5-1.25 |
0.3-2.0 | 7 | 12 | 0.4-2.0 | 0.5-1.25 |
0.3-2.0 | 8 | 16 | 0.4-2.5 | 0.5-1.25 |
0.4-2.0 | 9 | 10 | 0.4-2.5 | 0.5-1.25 |
0.6-2.0 | 10 | 12 | 0.5-4.0 | 0.5-1.25 |
0.6-2.0 | 12 | 15 | 0.8-4.0 | 0.5-1.25 |
1.0-5.0 | 13 | 100 | 1.0-5.0 | 0.5-1.25 |
1.0-5.0 | 17 | 100 | 2.0-6.0 | 0.5-1.25 |
1.0-6.0 | 21 | 100 | 3.0-7.0 | 0.5-1.25 |
1.0-6.0 | 21 | 100 | 4.0-7.0 | 0.5-1.25 |
2.0-7.0 | 34 | 135 | 5.0-8.0 | 0.5-1.25 |
2.0-7.0 | 36 | 110 | 5.0-8.0 | 0.5-1.25 |
2.0-7.0 | 38 | 100 | 5.0-8.0 | 0.5-1.25 |
Remarks: specifications listed above are for your reference only, and if you need others of any type or model, please don't hesitate to tell us
hexagonal expanded metal mesh
Expanded metal mesh is also called pulledd plate wire mesh. A rigid piece of metal that has been slit and drawn into an open mesh pattern in a single operation. It is stronger, lighter in weight and more rigid than the original base metal.
Material: Low Carbon Steel Plate, Aluminum Plate, Stainless Steel Plate, Titanium Plate, Alum-Platinum Plate, Lead Plate, Nickel Plate, etc.
Main Processes: Punching and Pulling.
Finishing: Electric-galvanized, hot-dipped galvanized, spray-printed
specification:
mesh thickness(mm) | distance | distance | Strand(mm) | width |
T | SWD | LWD | S | W |
0.3-0.6 | 3 | 3 | 0.3-2.0 | 0.5-1.25 |
0.3-0.6 | 3 | 4 | 0.3-2.0 | 0.5-1.25 |
0.3-0.8 | 4 | 4 | 0.3-2.0 | 0.5-1.25 |
0.3-0.8 | 4 | 5 | 0.3-2.0 | 0.5-1.25 |
0.3-0.8 | 5 | 5 | 0.3-2.0 | 0.5-1.25 |
0.3-1.0 | 5 | 6 | 0.3-2.0 | 0.5-1.25 |
0.3-1.5 | 6 | 7 | 0.3-2.0 | 0.5-1.25 |
0.3-1.5 | 6 | 12 | 0.3-2.0 | 0.5-1.25 |
0.3-2.0 | 7 | 12 | 0.4-2.0 | 0.5-1.25 |
0.3-2.0 | 8 | 16 | 0.4-2.5 | 0.5-1.25 |
0.4-2.0 | 9 | 10 | 0.4-2.5 | 0.5-1.25 |
0.6-2.0 | 10 | 12 | 0.5-4.0 | 0.5-1.25 |
0.6-2.0 | 12 | 15 | 0.8-4.0 | 0.5-1.25 |
1.0-5.0 | 13 | 100 | 1.0-5.0 | 0.5-1.25 |
1.0-5.0 | 17 | 100 | 2.0-6.0 | 0.5-1.25 |
1.0-6.0 | 21 | 100 | 3.0-7.0 | 0.5-1.25 |
1.0-6.0 | 21 | 100 | 4.0-7.0 | 0.5-1.25 |
2.0-7.0 | 34 | 135 | 5.0-8.0 | 0.5-1.25 |
2.0-7.0 | 36 | 110 | 5.0-8.0 | 0.5-1.25 |
2.0-7.0 | 38 | 100 | 5.0-8.0 | 0.5-1.25 |
Remarks: specifications listed above are for your reference only, and if you need others of any type or model, please don't hesitate to tell us